Oil Refinery Application
Live Air – Repaired In Situ

All areas requiring repair / wrapping are fully abraded to allow good adhesion for the TRK 19000

The first application of the TRK19000 is made on the prepared pipe surface around the leaking area

The first “wrap” of TRK19007 is made – carefully overlapping 50% on each wrap application

The second – third and final coats of TRK19000 and the second and third wraps of the TRK19007 – JOB FINISHED and SUCCESSFUL!

Hole blown in bottom 6” Pipe “T” Joint. TRK19000 Resin & Hardeners + TRK 19007 Glass Tape Solved the problem and SAVED a lot of downtime and cost

Print This Page (Opens in new window)

A fire extinguisher for your pipes!